Description: Die cutting shifted 6mm left resulting in 47 appearing at left instead of right causing 3 bar tag error.Same tag error can also be caused by the die cut shifting 4.5mm right.

[TAG IMAGE]  

Description: Vertical pair; die cutting shifted up 13mm. Top stamp is 11mm tall and tagged G4aT; bottom stamp is 37mm tall and tagged G4dH. Normal stamps are 24mm tall.

[TAG IMAGE]  

Description: Block of 4 from centre (gutter) in booklet. Die cutting shifted left 6mm resulting in 47 appearing on left 2 stamps with stamps total width of 6mm. Right two stamps are 20.5mm wide but 47 is cut off due to perf shift. Left pair and right pair separated by peel and fold selvege. Tagging is applied correctly but due to perf shift left 2 stamps are G4cL and right 2 stamps are G4cR.

[TAG IMAGE]  

Description:

[TAG IMAGE]  

Description: Die cutting shifted 3mm right resulting in TRAFFIC LIGHT dots which are normally trimmed off,appearing at right edge of stamp and causing 3 bar tag error.

[TAG IMAGE]  

Description: Lower left corner of booklet stamp with die cutting shifted 6mm left resulting in the 47 being cut off the stamp and die cutting is in the booklet cover.Tagging top and right missing.

[TAG IMAGE]  

Description: Die cutting shifted 3mm right resulting in Pelez et Pliez marginal inscription,normally trimmed off appearing at right edge of stamp resulting in 2 bar tag error.

[TAG IMAGE]  

Description:

[TAG IMAGE]